|
|
DULLING AGENT Dulling Agent is white in nature that gradually reduces the shine in water base coatings. This is an additive that can be put in your waterbase premix or topcoat.
|
|
|
FLAT AYD Flat ayd is a clear additive that dulls most waterbase coatings. The more that is added the flatter the finish coat.
|
|
|
FLEX AYD Flex Aid added to water base dyes for for additional flex that is necessary Additional flex to finishes spray grain. for fine finishing of extremely flexible leather.
|
|
|
FORGIVEN - CROSS LINKER Forgiven Crosslinker is a must have for lengthened durability for wear; it extends the life of your waterbase coating.
|
|
|
| IRON LINKIron Link is a specialized cross linker that not only makes the iron man harder but improves the grip. 1cc per one oz is ratio. ( 4oz of link per Qt.)
|
|
|
LOVE POTION #9 - VINYL COMPOUND THINNER LOVE POTION #9 - VINYL COMPOUND THINNER for all heat cured compounds. excellent also as a resurfaces for enhanced heat grain
|
|
|
MOON DUST - VINYL AND LEATHER COMPOUND THICKENER Moon Dust is a product that is white, and very,very lightweight. It is designed primary as a thickener for repair compounds. Mood Dust is an excellent product in making best friend even thicker when needed.
|
|
|
PHASE ONE Phase One is a water-based hard plastic clear primer.Excellent adhesive to most interior and exterior automotive plastics. Water clean up. Use as an alternative to solvent-based adhesion promoter.Interior application - Spray or wipe on 1 to 2 coats of plastic coats. Air dry or low heat dry each coat. Color coat with Premixed Dye. Exterior application - Add pigment to plastic coats and apply as a single stage spray.
|
|
|
SKINNY DIP Skinny Dip is a water base thinning agent for water base. Skinny Dip thins out the water base without losing it strength and flexibility. ( It is use with water base 95 and Flex Cure Products). You can add up to 50%.
|
|
|
SLIP AYD Slip Ayd is an additive that is added to water base coatings and used primarily on high traffic areas. Slip Ayd provides a slip that eliminates friction and helps created longevity to the color coated substrate. A water-borne Slip agent helps in creating a natural feel on leather.
|
|
|
| DOC'S DIRT TERMINATOR - DDTDOC'S DIRT TERMINATOR (DDT) IS AN EXCELLENT CLEANER
|
|
|
DOC'S SPOT REMOVER Doc's Spot Remover is a wonder, safe product that can remove blood, grass stains, ink marks and much much more. The product is clear, odorless and colorless. Completely safe and will not be damaged by freezing.
|
|
|
GENTLE CLEAN Gentle Clean is a gentle cleaner that is odorless and safe.
|
|
|
RAW HIDE LEATHER CLEANER Raw Hide Leather Cleaner is safe, gentle and will remove ink from leather. Raw Hide will not affect previously coated leathers. The color is slightly red but will not leach into leather skin when cleaning.
|
|
|
RED OUT Red Out is a product that is used with an iron, towel and steam from the iron. Simply wet the area with Red Out and iron the towel over the area with the steam cycle and then lift. The red if it is not already set will be transferred to the white towel. The process is repeated until the red is completely removed.
|
|
|
SILICONE WASH CLEANER / PREP Silcone Wash Cleaner/Prep is a safe vinyl and leather prep designed to remove silicone, wax and similar coatings without disturbing the substrate. Silicone Wash is an all around must have cleaner to have in your kit. It works great for cleaning up overspray as well.
|
|
|
TRI CLEAN Tri Clean is a heavy duty cleaner. It cleans grease, kool-aid, pet stains, blood, grass, shoe polish and much more. This water soluble cleaner is the best leather, vinyl and plastic prep. Excellent for prepping, stripping or wet sanding of leather.
Definitely one of the best cleaners around!
|
|
|
Book Mobile Madness Mobile Madness is complete instructional book on how to repair Leather, Vinyl, Cloth and Plastic and much, much more.
|
|
|
Classic Leather Waterbase Aerosol Dye for BMW Classic Waterbase Leather Waterbase Aerosol
BMW owners are very unique people and expect us to produce the best. Some may be called real party animals and such and perhaps even become lounge lizards too. Don't waist their time or yours. Use the handy dandy water base auto match aerosol for the right color. and yes...Let the party begin!!!!
|
|
|
Classic Leather Waterbase Aerosol Dye for FORD-LINCOLN-MERCURY Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Aerosol Dye for FORD-LINCOLN-MERCURY Classic Waterbase Leather dye: Water base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.
|
|
|
Classic Leather Waterbase Aerosol Dye for FORD-MERCURY Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for MASERATI Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for ACURA-HONDA Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for AUDI Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for CHRYSLER Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for DODGE Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for GM BUICK Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for GM: PONTIAC Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for HYUNDAI Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for INFINITI Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for ISUZU Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for JAGUAR-ROLLS ROYCE-FERRARI Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for KIA Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for LANDROVER Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for LEXUS Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
Classic Leather Waterbase Dye Aerosol for MADZA Classic base colors designed for re-coloring OEM leather, vinyl & plastics that demand ease of application, long wear and high performance durability.DESCRIPTION: Pre-matched water base permanent colors ready for easy application.
FEATURES: Non-flammable. Quick Drying.
Water Clean up.
Excellent adhesion on leather, vinyl or plastic (use Phase one or Amigo primer first).
Dries in minutes. Handling of finished product within minutes of applying final coat.
Use low heat to speed up drying.
Colors can be easily adjusted with tinting pigments or PM toners.
Performance is equivalent and often superior (ex. leather) to solvent base coatings.
APPLICATION: Clean area with triclean prep cleaner . Used a scrub brush, scotch Brite pad or wet sand with sandpaper. Shake or stir color, check color match by spraying a small amount and allow to dry. Spray medium coats of color, allow to dry between each coat. For added durability, add
forgiven crosslinker () to the color coat or topcoat clear.
|
|
|
|
Note: All prices in US Dollars
Specials
|
Carpet DispenserCarpet Roll Dispenser is metal dispenser can be mounted to the wall or another type of sturdy plate form. fits all sizes ranging from 100 to 600 feet.
|
 THE FINISHING TOUCHEasy to use, No batteries required and you will not get shock. The Finish Touch is amazing tool to make the repair to look perfect.
|
|